SELLEYS Supa Glue  "INSTANT BONDING, NO CLAMPING REQUIRED" Bonds most non-porous materials. Sets within 10 seconds. (Maximum bond strength in 12 hours) Heat and water resistant.  One drop holds one tonne, provided the bond area exceeds 650mm2 and there is no gap between surfaces.  


Public Photos / Files - TDS(E)Public Photos / Files - MSDS(E)



  • Bonds in 10 seconds
  • Super strong
  • Heat and water resistant
  • Multipurpose clear adhesive


Available Size

  • 1g Tube x 3pcs
  • 2g Tube
  • 3ml Tube


Available at

  For details please click here


What materials is this product suit for?

Most non-porous surfaces, such as:

  • Metal
  • Rubber
  • Plastic
  • Wood, etc.
  • Not suitable on paper, leather, polyethylene, polypropylene or Teflon
  • Will not permanently bond glass or materials containing alkaline elements


Note: Not recommended for repairing handles of vessels containing hot liquids


How to use this product?

  • Remove nozzle and pierce tube seal with reverse end of cap and replace nozzle.
  • Surfaces to be bonded be clean and fix exactly
  • Apply one drop to only one of the surfaces to be bonded
  • Do not spread, align surfaces and apply slight pressure.
  • Allow several minutes to set and for bond strength leave it up to 12 hours


Storage and re-use

  • Wipe tip of tube, replace cap and store upright in dry cool place


Safety Tips

  • Keep out of reach of children.
  • Avoid contact with skin, eyes and avoid breathing vapour.
  • If skin contact occurs, apply solvent such as acetone to contact areas then wash off with water. Do not use solvent near eyes or open wounds.
  • In case of eye contact, immediately flush with water.