SELLEYS Supa Glue Strong & Adjustable

SELLEYS Strong & Adjustable Supa Glue Gel is great for all types household repairs. The thick gel consistency means repairs with no mess.


Public Photos / Files - chick-305108_960_720 Non-drip gel consistency is ideal for vertical jobs

Public Photos / Files - chick-305108_960_720 Allows extra time (20-60 secs) to align or reposition surfaces 

Public Photos / Files - chick-305108_960_720 No immediate finger bonding*

Public Photos / Files - chick-305108_960_720 Dries Clear 


Public Photos / Files - TDS(E)Public Photos / Files - MSDS(E)



  • Bonds a variety of surfaces**
  • Dries Clear for clean, neat results
  • Water resistant
  • No mixing required
  • 5 minutes for initial bond, 30 minutes for sufficient bond strength for practical use.
    Maximum bond strength reached in 12 hours
  • Non-drip gel consistency is ideal for vertical surfaces
  • More time to arrange & reposition
  • No immediate finger bonding*

 * Adhesive will stick to skin, but this is delayed 20 - 30 secs, depending on skin type and amount of adhesive

 ** Not recommended for Teflon, polyethylene, polypropylene plastics, glass, items that contain hot liquids. May cause leather to discolour or harden, if in doubt test on a small hidden area first.


Available Size

  • 3g Tube



  • Clear


Available at

  For details please click here


What materials is this product suitable for?

  • Ceramic
  • Metal
  • Wood
  • Leather
  • Rubber
  • Most plastics***

   *** Pre-test plastics to determine compatibility


How to use this product

  • Ensure surfaces to be bonded are clean, dry, free of dust and close fitting
  • Remove nozzle and pierce tube seal with reverse end of cap and replace nozzle.
  • Remove cap and apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure. Allow 30 minutes for sufficient bond strength for practical use. Maximum bond strength reached after 12 hours


Safety Tips

  • Keep out of reach of children.
  • Avoid contact with skin and eyes and avoid breathing in vapour.
  • Bonds on contact. Should fingers stick together apply a solvent such as acetone (nail polish remover to contact areas then wash with water.
  • DO NOT use solvents near eyes or open wounds. In case of eye contact immediately flush with water for at 15 minutes and seek medical advice

 NOTE: This product is not hazardous once cured.



  • Wipe tip of tube, replace cap and store upright in dry cool place