<
SELLEYS Kwik Grip Waterbased

SELLEYS Kwik Grip Waterbased is a waterbased contact adhesive.  It is excellent for bonding large, horizontal, flat, close-fitting surfaces e.g. Veneers and laminates for bench or table tops.  Forms a durable, heat resistant bond.  

 

 Low odour

 Excellent waterbased adhesion

 Maximum bond strength is reached after 24 hours

 Suitable for cork, leather, canvas  

 

Public Photos / Files - TDS(E)Public Photos / Files - MSDS(E)
Overview

Features

  • High Strength 
  • Easy to use
  • Easy to clean up – Cleans up with water
  • Low odour/ Low VOC / Non-toxic – No harmful solvent fumes (Safer than solvent based adhesives).
  • Especially useful if repairing inside your home or in a confined space. e.g. Car.
  • Suitable for use on horizontal or vertical surfaces
  • Can be used in same method as other adhesives (wet bond) for small repairs.
  • Heat resistant to 160℃
  • Non-flammable

 

Available Sizes

  • 50ml Tube

 

Appearance

  • Milk white

 

Available at

    For details please click here

Information

What materials is this product suitable for?

  • Vinyl
  • Polystyrene
  • Foam
  • Rubber
  • Cork
  • Felt
  • Leather
  • Canvas
  • Metals
  • Most plastics (Not recommended for bonding Polyethylene or Polypropylene Plastics)

 

How to use this product?

  • Ensure surfaces are clean and dry. Remove cap and carefully remove foil seal.
  • Apply to both surfaces and spread evenly, ensuring surfaces are completely covered. Keep surfaces apart until clear and almost 'touch dry' - approx. 20 minutes, not more than 40 minutes.
  • Position items carefully, still keeping surfaces apart. When edges are perfectly aligned, working from one edge, press surfaces firmly together. Grabs IMMEDIATELY on contact.
  • Secure the bond by running a roller over the bonded surfaces or by hammering the surface from the centre outwards using a padded block. Maximum bond strength is reached after 24 hours. Clamping of warped or curled surfaces may be necessary.

WET BONDING (Small areas or porous surfaces)

  • Ensure the surfaces are clean and dry.
  • Apply KWIK GRIP to one surface, then bring the surfaces together and clamp until dry.

 

Safety Tips

  • Clean up excess wet adhesive with water.
  • Drying time may be extended in cold or wet weather, or for thicker applications. DO NOT apply below 10℃.
  • NOT for Polyethylene or Polypropylene. Use Selleys All PLASTIC FIX.
  • NOT for frequently damp or wet areas or exterior use.

 

Warning/ First-Aid:

  • Keep out of reach of children.
  • Avoid contact with skin and eyes. In case of eye contact, immediately flush with water and wash skin with soap and water.