Features

• Crystal Clear
• Applies Clear, Dries Clear
• Strong and Durable
• Heat and Water Resistant

Available Size

• 50ml Tube

Available at

• Japan Home Centre
• Mall Builderhood (Online Store)

  For details please click here

What materials is this product suit for?

• Veneers
• Rubber
• Cork
• Felt
• Leather
• Canvas
• Metal
• Timber
• Laminate

How to use this product?

• Ensure surfaces are clean and dry. If cutting laminate sheets, cut slightly oversize. Tube: Remove cap and carefully pierce foil seal.
• For porous surfaces apply a thin coat to seal surface and allow to dry for approximately 40 minutes.
• Apply to both surfaces and spread evenly ensuring surfaces are completely covered. Keep surfaces apart until adhesive is almost dry – approximately 15 minutes, no more than 30 minutes.
• Position items carefully, still keeping surfaces apart with dowels. When edges are perfectly aligned, remove dowels, and working from one edge, press surfaces firmly together. Grabs immediately on contact.
• Secure bond by running a roller over the bonde3d surfaces or by hammering the surface from the centre outwards using a padded block. Maximum bond strength is reached after 24 hours. Clamping of warped or curled surfaces may be necessary.

WET BONDING (Small areas or porous surfaces)

• Ensure surfaces are clean and dry.
• Apply Kwik Grip^® to one surface, then bring surfaces together and clamp until dry.

Safety Tips

• Ensure compatibility with materials to be bonded, test on an inconspicuous area or confirm with the materials manufacturer (e.g. some vinyl floor coverings are incompatible with solvent products).
• Do not use below 10°C.
• Ensure contents are completely dry before disposing.
• Not for polyethylene, polypropylene plastics.

Warning/ First-Aid:

• Keep out of reach of children.
• Avoid contact with skin and eyes. In case of eye contact, immediately flush with water and wash skin with soap and water.