SELLEYS Neutral Silicone Sealant
SELLEYS Neutral Silicone Sealant reacts with atmospheric moisture to produce a silicone rubber seal. It is ideal for applications such as: weather sealing, baths, vanities, kitchen and shower screens or any area subject to hot, humid or wet conditions.
Excellent adhesion to most building substrates
Compliant with BS 5889:1889 British Standard
Joint movement capability of +/- 25%
No metal corrosion
Does not shrink when curing
Perfect for use:
Kitchen and Shower screens
Any area subject to hot, humid or wet conditions
What materials is this product suitable for?
How To Use
How to use this product
Ensure surfaces are clean and free of oil, grease or loose particles.
Porous surfaces should be prepared by grinding, brushing, wiping with a cloth or blowing off with oil-free compressed air. Any laitance should be removed from concrete-based surfaces.
Non-porous surfaces should be free of scale, rust or oxides. They can be degreased with a solvent such as MEK, acetone or mineral turpentine. Some degreasing solvents may leave a residue that should be removed.
Cut cartridge tip & nozzle end to desired opening.
Fit cartridge with nozzle & apply using a cartridge gun.
Push the sealant into joint or onto surface. Ensure sealant makes good contact with surfaces.
To achieve neat joint use masking tape on both sides of the joint and remove tape before product skinning
Uncured product can be removed with mineral turpentine.
Cured product can be removed by mechanical action.
Not recommended for areas in direct contact with food, eating utensils and drinking water.
Uncured sealant may cause an allergic skin reaction.
Keep out of reach of children.
Avoid skin and eye contact and breathing vapours. If skin contact occurs, wash with soap and water.
If in eyes, flood with water for at least 15 min and seek medical advice.
For further detail on the safe use of this product, please refer to our Material Safety Data Sheet.