SELLEYS Knead-It Underwater

Repair & Fix

SELLEYS Knead-It Underwater

SELLEYS Knead It underwater is a fast-setting, fiberglass-reinforced polymer compind that specially formulated to adhere to surfaces exposed to damp, wet or underwater (Salt or fresh) conditions, The modeling-clay like materials eliminates drips and runs, facilitates adhesion to the substrate and allows the material to be shaped and formed as needed before curing begins. Once cured, it can be drilled, screwed, swan, sanded, or painted. It is suitable for interior or exterior use.

TDS

MSDS

Features

Features

Restore, repair & rebuild wet & underwater surfaces
Can be drilled, screwed, sawn, sanded and painted

Available Size

50g

Colors

Dries white

Information

What materials is this product suit for?

Repair generators
Water and fuel pumps
Seal holes in foundations and outer walls
Fiberglass
Concrete
Glass
Metal
Wood
Plastic

How To Use

How to use this product?

Cut or twist off required amount
Mix by kneading with fingers to a uniform color. If mixing is difficult, warm to room temperature or slightly above
Apply to surface to be repaired within 12 minutes of mixing and mould to shape if required. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
KNEAD-IT UNDERWATER should be use within 12 minutes, after 20-30 minutes it will harden and begin to form a strong bond.
After an hour KNEAD-IT UNDERWATER may be drilled, sanded, machined, filed, sawed or painted.
Apply to surface and strike off excess material, preferable with a tool wet with clean water

*When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect

Safety Tips

Keep out of reach of children
May cause irritation to sensitive skin, wash hand with soap and water after use
May be harmful if swallowed
Eye irritant. In case of eye contact, flush with water, then contact doctor
Not intended for use in structural applications
When sanding cured putty and substrate, use protective eye wear and dust mask