SELLEYS Wet Area (White)

By /

‹ Repair & Fix

SELLEYS Wet Area (White)

SELLEYS Wet Area is a neutral (non acid) curing, one part silicone
sealant with mould and fungal resistance. Providing water protection in all wet areas such as bathrooms, kitchens and laundry. Ideal sealant for gaps around showers, baths, spas, sinks and plumbing fixtures. Excellent adhesion is achieved on ceramics, glazed tiles, metal, plastic, rubber, glass, concrete and grouts.

Dealers
eShop

TDS

MSDS

Features

Features

Superior adhesion*
Forms a durable seal
Does not shrink when drying
Resistant to growth of unsightly mould and fungus
Low odour during application
Non corrosive
Remains flexible -will not shrink, crack, crumble or dry out
Resists moisture, hot cooking oils and steam

*Superior adhesion compared to conventional acid cure silicones which are poor on concrete and cement grouts. The increased adhesion reduces the possibility of fungal growth behind the silicone bead.

Available Size

75g Tube

Colors

White

Information

What materials is this product suit for?

Ceramic
Glazed
Porcelain fixtures
Metal
Copper & Brass fittings
Powder coated aluminium
Aluminium
Rubber
Plastic laminates
Stainless steel
Glass
Concrete & grouts

How To Use

How to use this product?

Thoroughly clean and dry surface from oil, dirt and grease with mineral turpentine
Pierce seal in tube by inverting cap and pushing into top of tube
Cut nozzle at 45 degree angle and fit to tube
Hold tube at 45 degree angle and push sealant ahead of nozzle
For a smooth finish, tool with spatula. Excess sealant must be cleaned up before the sealant skins in 5-10 minutes. Wipe excess away with a cloth dampened mineral yurpentine
Sealant will cure fully in 48 hours. At this point any unneeded sealant can be removed by trimming with a sharp blade, but avoid under-cutting seal
After use remove nozzle and replace cap

Storage and re-use

Store in a cool dry place

Clean up

Clean all excess sealant from equipment before it cures with a cloth dampened with mineral turpentine or acetone
Once cured sealant is extremely difficult to remove and must be abraded or trimmed with a knife

Safety Tips

For a cleaner appearance mask both sides of joint prior to sealing. Remove tape before silicone skins
For a better finish complete painting prior to use of sealant as it can not be painted over
For a smoother finish use a spatula dipped in detergent solution