SELLEYS Liquid Nails Fast

Adhesive

SELLEYS Liquid Nails Fast

SELLEYS Liquid Nails Fast is a water-based high strength construction adhesive with the benefit of faster application, which minimises the need to support joints while the adhesive cures. It alsoin accordance with national standards of formaldehyde content.

TDS

MSDS

Features

2x stronger initial hold compared with previous formulation.

Features

Fast grab minimises slippage when adhering on vertical surfaces and minimises the need to support joints while it cures.
Doesn’t drip, sag or string, so there is less mess when using.
Bridges gaps on rough and ill fitting construction material.
Water based, so it is faster to clean up with wet cloth. Less mess and fuss.
Low odour making it ideal for indoor jobs.
Strong bond – which will cope with shrinkage and thermal movement, so you know the job will last.
Heat resistant meaning the integrity of the bond will remain when exposed to direct sunlight.
Paintable when dry, to give you a neat, quality finished job
Cures and works best on porous surfaces, which makes it ideal for sticking wall panels to masonry.

Available Sizes
420g Cartridge

Colours
Brown

Volatile Organic Compounds (VOC) Content

< 70g / L # Formaldehyde content in accordance with national standards “GB18583-2008 Indoor decorating and refurbishing materials - Limit of harmful substances of adhesives”

Information

Where can this product be used?
102816.Wood to wall illust Timber panels to walls and frames

102816.Polystyrene illust Polystyrene files to ceilings

Perfect for indoor projects
Skirting boards
Architraves
Cornices
Wall panelling to masonry
Styrene foam to metal roofing
* Tasks where nailing is not desirable

What materials is this product suitable for?
Medium-density fibreboard (MDF)
Particle board
Timber
Plaster board
Styrene Foam
Masonry
Concrete
Tiles
Ceramics
Metal
Most plastic**
Rubber
Glass
** Pre test plastic to determine compatibility

How To Use

How to use this product
Ensure the surfaces to be bonded are clean, dry and free from dust, grease, oil and loose powdery materials.
Cut the tip of the cartridge and cut the nozzle end to desired opening (approx. 5mm diameter). Fit to the top of the cartridge. Insert the cartridge into a caulking gun.
CONTACT BOND METHOD (For higher initial grab)

apply to one surface only, press together and pull apart.
Allow to dry for up to 15 mins – 1hr before firmly joining.
WET BOND METHOOD

Apply a bead of product along the length of the joist, stud or batten. On broad flat surfaces apply beads every 40cm.
Bring surfaces together as soon as possible (within the first 10 minutes).
Fix the surfaces with sufficient nails, screws or clamping to hold load and achieve contact over the total bond area.
Allow the adhesive to set (at least 24 hours) before removing any temporary fasteners or clamping.

Clean up

Wet adhesive – Removed with warm soapy water or a damp cloth
Dry adhesive – Removed by sanding or scraping

Handy tips
Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
High humidity, low temperatures and thick applications can both significantly slow the cure rate of LIQUID NAILS FAST especially when used on non-porous surfaces.
Faster curing is achieved when at least one surface is porous.
a good bond strength is achieved after 24 hours and will continue to strengthen over a 2-3 day period. The time it takes to form a strong bond depends on the nature and conditions of the application. In cold or damp weather and between non porous materials, the drying time is greatly extended.
Not suitable for use on mirrors.

Safety tips
Keep away from children.
Avoid contact with skin & eyes.
If in eyes, rinse immediately with plenty of water and seek medical advice.
If contact occurs, wipe off immediately and wash with detergent. It may irrtate sensitive skin.
If swallowed, do NOT induce vomiting and seek medical advice.
Refer to Material Safety Data Sheet for more information.

Storage
Store in a cool place.
The adhesive should be used within 6 months after opening.
After use keep the nozzle on the cartridge. Sealing the nozzle with placsticene or Blu Tac the wrapping the nozzle in aluminium foil and sealing tightly with tape can prevent evaporation for longer storage.
Uncured LIQUID NAILS FAST is sensitive to extremes of heat and cold. It should not be allowed to be frozen or heated during storage.