SELLEYS Supa Glue Shock Proof

Repair & Fix

SELLEYS Supa Glue Shock Proof

SELLEYS Supa Glue Shock Proof is a breakthrough in Supa Glue technology. It has superior bond strength on metal. It is impact resistant, heat resistant up to 150 c and is more flexible than standard super glues. Shock Proof has been formulated to give you more working time than standard Super Glues and sets in around 2-3 minutes. And of course you know that if it’s Selleys it works!





Impact resistant
Heat resistant
Superior bond on metals

Available Size

3ml Tube


What materials is this product suit for?

Most plastic

How To Use

How to use this product?

Ensure surface to be bound are clean, dry, free of dust and close fitting.
Remove nozzle and pierce tube seal with reverse end of cap and replace noozle.
Remove cap and apply a small amount of glue to one surface.
Bring surfaces together and apply slight pressure.
Sufficient bond strength for practical use achieved after 12 hours. Bond will strengthen over 48 hours.
** Not recommended for Teflon, polyethylene, polypropylene plastics, glass, items that contain hot liquids. May cause leather to discolour or harden, if in doubt test on a small hidden area first.

Storage and re-use

Wipe tip of tube, replace cap and store upright in dry cool place

Safety Tips

Keep out reach of children.
Avoid contact with skin, eyes and avoid breathing in vapour. Bonds on contact. Should fingers stick together, apply a solvent such as acetone (nail polish remover) to contact areas then wash with water.
Do not use solvent near eyes or open wounds. In case of eye contact, immediately flush with water for at least 15 minutes and seek medical attention.

Note: This product is not hazardous once cured.