SELLEYS Supa Glue

By /

‹ Repair & Fix

SELLEYS Supa Glue

SELLEYS Supa Glue “INSTANT BONDING, NO CLAMPING REQUIRED” Bonds most non-porous materials. Sets within 10 seconds. (Maximum bond strength in 12 hours) Heat and water resistant. One drop holds one tonne, provided the bond area exceeds 650mm2 and there is no gap between surfaces.

Dealers
eShop

TDS

MSDS

Features

Features

Bonds in 10 seconds
Super strong
Heat and water resistant
Multipurpose clear adhesive

Available Size

1g Tube x 3pcs
2g Tube
3ml Tube

Information

What materials is this product suit for?

Most non-porous surfaces, such as:

Metal
Rubber
Plastic
Wood, etc.
Not suitable on paper, leather, polyethylene, polypropylene or Teflon
Will not permanently bond glass or materials containing alkaline elements

Note: Not recommended for repairing handles of vessels containing hot liquids

How To Use

How to use this product?

Remove nozzle and pierce tube seal with reverse end of cap and replace nozzle.
Surfaces to be bonded be clean and fix exactly
Apply one drop to only one of the surfaces to be bonded
Do not spread, align surfaces and apply slight pressure.
Allow several minutes to set and for bond strength leave it up to 12 hours

Storage and re-use

Wipe tip of tube, replace cap and store upright in dry cool place

Safety Tips

Keep out of reach of children.
Avoid contact with skin, eyes and avoid breathing vapour.
If skin contact occurs, apply solvent such as acetone to contact areas then wash off with water. Do not use solvent near eyes or open wounds.
In case of eye contact, immediately flush with water.